Need Help? Call 800-669-1422

I2 Flute Microphone

I2 Flute Microphone
I2 Instrument Microphone tailored for flute, with lightweight vibration-damping mount.

* Required Fields



The I2 Flute Microphone has been engineered from the ground up for smooth frequency response, low noise, and precise polar patterns with deep nulls and natural on- and off-axis response. Its tiny size makes it perfect for distance miking that is invisible on camera. Flexible new close miking techniques are aided by Countryman's Flute Mount, an extremely low-profile mount which brings the microphone close for excellent pickup and isolation.

Additional Information

Frequency Response:

Omnidirectional: 20 Hz to 20 kHz

Directional: 50 Hz to 20 kHz

Overload Sound Level:

High Gain Omni: 130 dB SPL at 1%

High Gain Directional: >> 130 dB SPL at 1%

Low Gain Omni: 150 dB SPL at 1%

Low Gain Directional: >> 150 dB SPL at 1%

Output Impedance:

1 kHz: 130 Ohm

< 100 Hz: 250 Ohm

Equivalent Input Noise (Pressure Mode)

High Gain: 20 dB SPL (A-Weighted)

Low Gain: 38 dB SPL (A-Weighted)

Power Requirements: 6V to 50V Phantom at 4mA. Voltage below 24V wil result in reduced overload SPL.

High Gain: -40 dBV/Pa (10 mV/Pa) at 1KHz

Low Gain: -56.5 dBV/Pa (1.5 mV/Pa) at 1 kHz


9/32" x 7/16" x 5/32" (7mm x 10.5mm x 3.5mm) excluding cable strain relief.