SKU: I2SAXBRASS

I2 Saxophone and Brass Microphone

Product Options: Clear Options
SKU: I2SAXBRASS

$398.00

SKU: I2SAXBRASS

$398.00

FEATURES

The I2 Saxophone and Brass Microphone has been engineered from the ground up for smooth frequency response, low noise, and precise polar patterns with deep nulls and natural on- and off-axis response. Its tiny size makes it perfect for distance miking that is invisible on camera. Flexible new close miking techniques are aided by Countryman’s Instrument Mount for saxophones, brass and horns, with a flexible positioning arm for perfect microphone placement.

COMPLETE CONTROL

COMPLETE CONTROL

The instrument-specific mounts for the I2 provide positioning freedom, allowing you to direct the microphone pattern to capture the natural tone of your instrument

VIBRATION DAMPING

VIBRATION DAMPING

I2 Instument Microphone mounts are designed to minimize vibration noise, including the use of viscoelastic damping materials to reduce transmitted shocks and key noise for clear audio recordings.

UNPARALLED PRECISION

The I2 maintains excellent pattern control and frequency response at all angles, for uncolored recordings and reduced feedback issues.

Comparison of Pattern Control

Left: I2 Instrument Microphone. Right: Competitor Instrument Microphone

HOW CAN I MIC A SAXOPHONE?

HOW CAN I MIC A SAXOPHONE?

The I2 Brass Instrument Mount has vibration-damping jaws that tightly grip the bell, with an adjustable wire that can be positioned at the center of the bell or placed to capture sound through the keys.

HOW CAN I MIC A VIOLIN / VIOLA?

HOW CAN I MIC A VIOLIN / VIOLA?

The I2 Violin Mount positions the microphone between the bridge and tailpiece in a secure, vibration isolating mount. Point the microphone toward the violin body.

HOW CAN I MIC A CELLO / DOUBLE BASS?

HOW CAN I MIC A CELLO / DOUBLE BASS?

The positioning arm on the I2 Cello Mount allows for a variety of microphone positions, including under the bridge or over the F-hole. Make sure the silver (active) side is pointed toward the body.

WHAT’S INCLUDED?

WHAT’S INCLUDED?

  • I2 Microphone
  • I2 Instrument Mount
  • Windscreen
  • Carrying Case
I2 Saxophone and Brass Microphone

TECH SPECS

Frequency Response:
Omnidirectional: 20 Hz to 20 kHz
Directional: 50 Hz to 20 kHz
Overload Sound Level:
150 dB SPL at 1% THD
Ouput Impedance:
600 Ohms +/- 2% balanced, transformerless. Will drive load impedance without distortion at full rated SPL.
Equivalent Acoustic Noise:
Omnidirectional: 25 dBA
Directional: 29 dBA
Power Requirements:
6V to 50V Phantom at 4mA. Voltage below 24V wil result in reduced overload SPL.
Sensitivity:
1.4 mV/Pascal
Dimensions:
5/16" x 5/8" x 5/32" (8mm x 16mm x 4mm) excluding cable strain relief.
FAQ

PRODUCT QUESTIONS, ANSWERED

RELATED PRODUCTS