Need Help? Call toll free: 1-800-669-1422

I2 Guitar Microphone

SKU: I2GUITAR
Clear

$366.00

Features

I2 Instrument Microphone tailored for guitars and center hole instruments, with low-profile mount.

Description

The I2 Guitar Microphone has been engineered from the ground up for smooth frequency response, low noise, and precise polar patterns with deep nulls and natural on- and off-axis response. Its tiny size makes it perfect for distance miking that is invisible on camera. Flexible new close miking techniques are aided by Countryman’s Guitar Mount, which positions the microphone for excellent pickup on center hole instruments.

What’s Included?

  • I2 Microphone
  • I2 Guitar Mount
  • Windscreen
  • Carrying Case

Options:

Pattern
Omni pattern Omnidirectional microphones pick up sound from all directions equally.
Cardioid pattern Cardioid rejects more ambient noise compared to an omni while providing a wide front-lobe for flexibility in placement.
Hypercardioid pattern Hypercardioid provides the most rejection of ambient noise but has a narrower front-lobe.
Bidirectional patternBidirectional picks up sound equally from two directions, and are commonly used in mid-side recording setups.
Brand/Model
  • Brand is the manufacturer of the wireless transmitter or digital recorder which will be used with the microphone.

  • Model is the model number of the transmitter pack or digital recorder. Choose “Hardwired” for a phantom powered XLR3 connection.

Features

Left: I2 Instrument Microphone. Right: Competitor Instrument Microphone

Unparalled Precision

The I2 maintains excellent pattern control and frequency response at all angles, for uncolored recordings and reduced feedback issues.

Complete Control

The instrument-specific mounts for the I2 provide positioning freedom, allowing you to direct the microphone pattern to capture the natural tone of your instrument

Vibration Damping

I2 Instument Microphone mounts are designed to minimize vibration noise, including the use of viscoelastic damping materials to reduce transmitted shocks and key noise for clear audio recordings.

How can I mic a saxophone?

The I2 Brass Instrument Mount has vibration-damping jaws that tightly grip the bell, with an adjustable wire that can be positioned at the center of the bell or placed to capture sound through the keys.

How can I mic a violin / viola?

The I2 Violin Mount positions the microphone between the bridge and tailpiece in a secure, vibration isolating mount. Point the microphone toward the violin body.

How can I mic a cello / double bass?

The positioning arm on the I2 Cello Mount allows for a variety of microphone positions, including under the bridge or over the F-hole. Make sure the silver (active) side is pointed toward the body.

Tech Specs

Frequency Response: Omnidirectional: 20 Hz to 20 kHz Directional: 50 Hz to 20 kHz
Overload Sound Level: 150 dB SPL at 1% THD
Ouput Impedance: 600 Ohms +/- 2% balanced, transformerless. Will drive load impedance without distortion at full rated SPL.
Equivalent Acoustic Noise: Omnidirectional: 25 dBA Directional: 29 dBA
Power Requirements: 6V to 50V Phantom at 4mA. Voltage below 24V wil result in reduced overload SPL.
Sensitivity: 1.4 mV/Pascal
Dimensions: 9/32" x 7/16" x 5/32" (7mm x 10.5mm x 3.5mm) excluding cable strain relief.

We’re here to help

Countryman Associates Debuts H7 Headset Microphone

Exceptionally controlled directional pattern and wide dynamic range combine with comfort and durability   Menlo Park, CA – June 2018… Countryman Associates, recognized globally as a leading manufacturer of miniature microphones and direct boxes, is pleased to...

read more

Countryman Associates Debuts H7 Headset Microphone

Exceptionally controlled directional pattern and wide dynamic range combine with comfort and durability   Menlo Park, CA – June 2018… Countryman Associates, recognized globally as a leading manufacturer of miniature microphones and direct boxes, is pleased to...

read more